Table of Contents |
---|
...
Navigation
De lobby is een publieke virtuele ruimte waarin vrij genavigeerd kan worden.
Mogelijke acties:
Klik en beweeg uw cursor om de lobby te draaien
Klik rechtstreeks op een bepaalde wand
Klik op de zoom in en uit knop om in of uit te zoomen op een wand
Klik op de wand zelf op de aanklikbare zones, afhankelijk welke applicatie voor u beschikbaar is gesteld
Uw klikgedrag heeft geen invloed op de view voor de bezoeker. In de lobby werkt de navigatie voor ieder individu apart.
Control panel
Als sales vertegenwoordiger kan je in de lobby via het control panel veranderen van keypoint.
OPGELET: indien je in de lobby het keypoint wijzigt, zal dit voor ALLE bezoekers ook wijzigen.
Controleren van het actieve scenario
Als sales kan u in uw showroom het actieve scenario controleren:
Open het control panel
U ziet een overzicht van alle beschikbare keypoints
Het huidige actieve keypoint wordt geaccentueerd
Ter info: een keypoint bepaalt de invulling van de wanden in uw showroom. Voor meer info, klik hier.
...
Veranderen van keypoint
Er zijn twee opties om te veranderen van keypoint:
Gebruik de vorige/volgende knop. Het eerstvolgende of het vorige keypoint wordt geactiveerd
Vul het gewenste keypoint nummer in in het voorziene veld en klik op ‘go’. Uw scenario verspringt onmiddellijk naar het ingegeven keypoint
OPGELET: indien je in de lobby het keypoint wijzigt, zal dit voor ALLE bezoekers ook wijzigen.
Een keypoint pauzeren
Een keypoint krijgt een ‘duration’ mee. Indien de tijd voorbij is gaat het keypoint automatisch over naar het volgende keypoint.
Indien u dit wil vermijden kan u het keypoint pauseren. Daardoor stopt de aftelklok van het keypoint en zal deze niet meer automatisch overgaan naar het volgende keypoint. Om de klok terug te activeren drukt u op play.
Opmerking: u kan op vandaag niet zien hoelang een keypoint nog actief blijft
Tip: vaak wordt de ‘duration’ op het maximale (23h) geplaatst om te voorkomen dat een keypoint onverwachts overgaan naar een volgend keypoint
Reset flow
Via de knop ‘reset flow’ start u opnieuw bij keypoint 1
OPGELET: indien je in de lobby het keypoint wijzigt, zal dit voor ALLE bezoekers ook wijzigen.
Refresh room
Via de knop ‘refresh room’ zal u een refresh uitvoeren op het actieve keypointThe lobby is a public virtual space in which you can navigate freely. Possible actions:
Click and move your cursor to rotate the lobby
Click directly on a specific wall
Click the zoom in and out button to zoom in or out on a wall
Click on the clickable zones on the wall itself, depending on which application has been made available to you
Your click behaviour will have no influence on the view for the visitor. The navigation works for each individual separately in the lobby.
Control panel
You can change the key point in the lobby via the control panel as a sales representative. ATTENTION: if you change the key point in the lobby, this will also change for ALL visitors.
Managing the active scenario
You can manage the active scenario in your showroom as a sales manager:
Open the control panel
An overview of all available key points will be displayed
The currently active key point will be highlighted
For your information: a key point determines the content of the walls in your showroom. For more information, click here.
...
Changing of a key point
There are two options to changing a key point:
Use the previous/next button. The next or the previous key point is activated
Enter the desired key point number in the provided field and click ‘go’. Your scenario will immediately jump to the entered key point
Attention: if you change the key point in the lobby, this will also change for ALL visitors.
Pausing a key point
A key point is assigned a ‘duration’. When the time has passed, the key point will automatically switch to the next key point.
If you would like to avoid this, you can pause the key point. This stops the countdown clock of the key point and will no longer automatically switch to the next key point. In order to reactivate the clock, press play.
Remark: you cannot see how long a key point will remain active at the moment
Tip: the ‘duration’ is often set to the maximum (23h) to prevent a key point from unexpectedly switching to the next key point
Reset flow
You can start again at key point 1 by using the ‘reset flow’ button
Attention: if you change the key point in the lobby, this will also change for ALL visitors.
Refresh room
You can perform a refresh of the active key point via the button 'refresh room'